Parts

Simple but very effective! Eliminates the play that is inherent with all hitch-mounted accessories because of the loose fit necessary for the accessory to slide into the hitch. The MotoTote Zero-Wobble bolt makes a solid connection between the hitch tube of the vehicle and the MotoTote. This is the bolt that comes with all MotoTote motorcycle carriers. The head is exactly the right diameter to recess into the hitch pin hole of the hitch tube of your vehicle and clamp the MotoTote tube to the...

These big bolts are for the connection of the MTX Platform to the square tube that goes in your hitch receiver. They are grade 8 and beefier than the stock bolts that came on MotoTote MTX carriers manufactured before May 2018 so they raise the comfort level of our engineers to the point where they will let you put more weight on your MotoTote carrier - effectively raising the weight capacity by 50 lbs.So the weight capacity of the MTX Sport goes to 600 lbs. and the capacity of the MTX m3 to...

Upgraded hardware set includes zinc-coated bolts and nuts. This is to address concerns with possible rusting of the stock bolts that come with the MotoTote MTX carriers. Rusting does not affect safety or function but we completely understand that it makes a bad impression.Does NOT include the Zero Wobble Bolt.If you have purchased a MotoTote motorcycle carrier from MotoTote.com, you are eligible to get this product for free using the MotoBucks (rewards points) that you received when you...

Includes:Two (2) - Big hex head bolts (could be black or yellow)One (1) - Long socket head boltFour (4) - Medium length socket head boltsOne (1) - Short socket head boltSeven (7) - Nuts (these could be silver or yellow)Five (5) - Flat washersOne (1) - Lock washerOne (1) - Square plastic end capOne (1) - Allen WrenchOne (1) - Ramp TabOne (1) - Lanyard with key ringsOne (1) - Lynch PinRound end caps are not included ...

This is the platform onto which all parts of the carrier are attached. Is the main structural support. For use on all MotoTote MTX products.

Front wheel stop for MotoTote MTX Sport carrier (MTXS). Accommodates street bike-sized tires of up to 5 inches wide. Provides lateral support to hold bike upright during loading until secured with tie-downs. This frees up your hands to get the tie-downs. Built in back-stop keeps bike from rolling backwards once the bike is pushed into the wheel stop.

For loading of bike onto Moto-Tote MTX Sport carrier MTXS. Accommodates rear tire widths of up to 8.50 inches. Ends of ramp are tapered and smooth to prevent damage to motorcycle fairings in the event of high-centering during loading. Tube and wire construction is super-light and super-strong and provides superior slip resistance. Mates with MotoTote Sport Tire Track MTXSTK during loading. Specially formed teeth prevent "twisting out". When not in use, it attaches to hardpoints on the MotoTote...

Accommodates rear tire widths of up to 8.50 inches. Tail of track is tapered and smooth to prevent damage to motorcycle fairings in the event of high-centering during loading. Tube and wire construction is light but extremely strong and provides superior "tire stick" to keep the bike in-place. Mates with Moto-Tote Sport loading ramp MTXSRP for loading of bike. Bolts to MotoTote MTX Platform MTXPA. ...

New from MotoTote! This is the EXTENDED length MotoTote square tube which goes into the vehicle receiver/hitch - the MTX Platform and rest of the MotoTote carrier attach to this tube.This tube replaces the stock tube and provides up to 11 inches of additional distance from the vehicle.For vehicles with large spare tire or RVs with the hitch recessed under the bumper. This is pretty rare and so in most cases not necessary. This longer tube provides for a distance adjustable from 18 to 31 inches...

This is the standard length MotoTote square tube which goes into the vehicle receiver/hitch - the MTX Platform and rest of the MotoTote carrier attach to this tube.Distance from vehicle with this stock MotoTote receiver tube is adjustable from 11 to 20 inches. This is measured from the hitch pin hole to the bike centerline. If you need a longer tube for vehicles with large spare tire or RVs with the hitch recessed under the bumper, see RTBL - Receiver Tube Long. If you need help calculating...

Rear tie-down arm for Moto-Tote MTX carriers. Tie-down loops are 13 inches apart. Heavy duty polyester powder-coated steel.Note: Not compatible with non-MTX carriers

Front tie-down arm for MotoTote MTX carriers. Tie-down loops are 29 inches apart. Heavy duty polyester powder-coated steel. Optionally, you can use it as a rear tie-down arm on the MotoTote MTX carriers for added lateral support since the tie-down loops are farther apart than the stock rear tie-down arm.Note: Not compatible with non-MTX carriers