MTX m2

Parts for the MTX m3 Carrier. This is the current model MotoTote carrier for dirt bikes and scooters.


Products 1-12 of 13
Show
Zero-Wobble hitch bolt, nut, washer Zero-Wobble, hitch bolt, anti-rattle, stabilizer, hitch pin
Retail: $9.99
Price: $8.00
(7)
Availability: In Stock
MotoTote Item #: MTHB -

    Simple but very effective! Eliminates the play that is inherent with all hitch-mounted accessories because of the loose fit necessary for the accessory to slide into the hitch. The MotoTote Zero-Wobble bolt makes a solid connection between the hitch tube of the vehicle and the MotoTote. This is the bolt that comes with all MotoTote motorcycle carriers. The head is exactly the right diameter to recess into the hitch pin hole of the hitch tube of your vehicle and clamp the MotoTote tube to the...

    MTBAB
    Retail: $9.99
    Price: $6.00
    (2)
    Availability: In Stock
    MotoTote Item #: MTBAB -

      These big bolts are for the connection of the MTX Platform to the square tube that goes in your hitch receiver. They are grade 8 and beefier than the stock bolts that came on MotoTote MTX carriers manufactured before May 2018 so they raise the comfort level of our engineers to the point where they will let you put more weight on your MotoTote carrier - effectively raising the weight capacity by 50 lbs.So the weight capacity of the MTX Sport goes to 600 lbs. and the capacity of the MTX m3 to...

      Upgraded hardware for MotoTote MTX carriers no rust hardware nuts bolts screws grade 8
      Price: $30.00
      Availability: In Stock
      MotoTote Item #: HW15 -

        Upgraded hardware set includes zinc-coated bolts and nuts. This is to address concerns with possible rusting of the stock bolts that come with the MotoTote MTX carriers. Rusting does not affect safety or function but we completely understand that it makes a bad impression.Does NOT include the Zero Wobble Bolt.If you have purchased a MotoTote motorcycle carrier from MotoTote.com, you are eligible to get this product for free using the MotoBucks (rewards points) that you received when you...

        Hardware Kit for MTX Mototote Carriers MotoTote nuts bolts screws washers lanyard hardware
        Price: $30.00
        Availability: In Stock
        MotoTote Item #: MTHK -

          Includes bolts, nuts, washers, lynch pin, lanyard, ramp keeper tab, hex wrench, and plastic end caps.

          MTX Platform for all MTX Carriers Platform for MotoTote MTX Carriers
          Retail: $99.99
          Price: $90.00
          (3)
          Availability: In Stock
          MotoTote Item #: MTXPA -

            This is the platform onto which all parts of the carrier are attached. Is the main structural support. For use on all MotoTote MTX products.

            Receiver Tube Long (single bike) receiver tube, extended receiver tube, long receiver tube, main tube, square tube, hitch tube, extender
            Retail: $89.00
            Price: $60.00
            (3)
            Availability: In Stock
            MotoTote Item #: RTBL -

              New from MotoTote! This is the EXTENDED length MotoTote square tube which goes into the vehicle receiver/hitch - the MTX Platform and rest of the MotoTote carrier attach to this tube.This tube replaces the stock tube and provides up to 11 inches of additional distance from the vehicle.For vehicles with large spare tire or RVs with the hitch recessed under the bumper. This is pretty rare and so in most cases not necessary. This longer tube provides for a distance adjustable from 18 to 31 inches...

              Receiver Tube Standard (single bike) receiver tube, main tube, square tube, hitch tube
              Price: $50.00
              Availability: In Stock
              MotoTote Item #: RTBS -

                This is the standard length MotoTote square tube which goes into the vehicle receiver/hitch - the MTX Platform and rest of the MotoTote carrier attach to this tube.Distance from vehicle with this stock MotoTote receiver tube is adjustable from 11 to 20 inches. This is measured from the hitch pin hole to the bike centerline. If you need a longer tube for vehicles with large spare tire or RVs with the hitch recessed under the bumper, see RTBL - Receiver Tube Long. If you need help calculating...

                Tie Down Arm for MTX carriers - Rear MotoTote rear tie down arm
                Price: $50.00
                Availability: In Stock
                MotoTote Item #: TD4 -

                  Rear tie-down arm for Moto-Tote MTX carriers. Tie-down loops are 13 inches apart. Heavy duty polyester powder-coated steel.Note: Not compatible with non-MTX carriers

                  Tie Down Arm for MTX carriers - Front tie down arm front tiedown
                  Price: $70.00
                  Availability: In Stock
                  MotoTote Item #: TDX -

                    Front tie-down arm for MotoTote MTX carriers. Tie-down loops are 29 inches apart. Heavy duty polyester powder-coated steel. Optionally, you can use it as a rear tie-down arm on the MotoTote MTX carriers for added lateral support since the tie-down loops are farther apart than the stock rear tie-down arm.Note: Not compatible with non-MTX carriers

                    Loading Ramp for MTX3 m3 Carrier ramp, sport, MTX3, MTX3RP, loading, loading ramp
                    Retail: $69.99
                    Price: $60.00
                    Availability: In Stock
                    MotoTote Item #: MTX3RP -

                      For loading of bike onto MotoTote MTX m3 carrier MTX3. Accommodates rear tire widths of up to 6.00 inches. Tube and wire construction is light but extremely strong and provides superior slip resistance. Mates with Tire Track during loading with specially shaped tabs that prevent twisting/flipping. When not in use, it attaches to hardpoints on the MotoTote carrier so it does not have to be carried inside the vehicle.

                      Wheel Chock BACK Stop for MTX m3 Carrier MTX, MTX3, m3, wheel chock, back stop, tire, front tire
                      Price: $60.00
                      Availability: In Stock
                      MotoTote Item #: MTXBS3 -

                        For MotoTote MTX m3 only - BACK stop portion of wheel chock assembly. The wheel chock assembly of the MTX m3 (for securing the front tire of the motorcycle) consists of a Front Stop and Back Stop - This is the BACK Stop portion. Goes behind front tire to keep bike from rolling back during loading.

                        Wheel Chock FRONT Stop for MTX m3 carrier tire stop, wheel chock, wheel stop, front, front tire, tire chock, MTX3, m3
                        Price: $70.00
                        Availability: In Stock
                        MotoTote Item #: MTXF3B -

                          For MotoTote MTX m3 only - FRONT stop portion of wheel chock assembly. The wheel chock assembly of the MTX m3 (for securing the front tire of the motorcycle) consists of a Front Stop and Back Stop - This is the FRONT Stop portion. Goes in front of the front tire. Side support helps to balance the bike upright during loading until tie-downs can be attached. ...