Item #: RTBL
Availability: In Stock
Ships same day - See details

Retail: $89.99
Price: $59.99
You Save: $30.00 (33.3%)
    MotoBucks to Purchase: 8570

    Quantity:

    New from MotoTote! This is the EXTENDED length MotoTote square tube which goes into the vehicle receiver/hitch - the MTX Platform and rest of the MotoTote carrier attach to this tube.

    This tube replaces the stock tube and provides up to 11 inches of additional distance from the vehicle.

    For vehicles with large spare tire or RVs with the hitch recessed under the bumper. This is pretty rare and so in most cases not necessary. This longer tube provides for a distance adjustable from 18 to 31 inches from the vehicle. Distance with the STOCK MotoTote receiver tube is 20 inches. These distances are measured from the hitch pin hole to the bike centerline.

    If you need help calculating required clearance for your vehicle, feel free to contact us and we'll help you figure it out!

    Number of questions: 0
    Overall Customer Rating of 3 Reviews:
    California

    Solved a problem for me.

    Rating:
    Pros:
    • Moto Bucks
    • Veterans Discount
    Cons:
    • None
    I have been using a Mototote Mtx carrier for a few years to carry a motor scooter on the back of my rv. I am about to trade in my rv and the new one has a rather recessed receiver. I didn't want to have to use an extension receiver which would have introduced another joint into the hitch setup. I was pleased to find that Mototote has the solution to this issue in the form of a Long Receiver Tube which provides up to 11" of additional clearance. A+ for MotoTote.

    Rating:
    Pros:
    Cons:
    Extended tube arrived quickly and fit perfectly. Extra length needed to mount scooter to new motor home with recessed hitch--worked as advertised! Thanks MotoTote!

    San Mateo

    Long Tube

    Rating:
    Pros:
    Cons:
    Nice and sturdy, however the bolt holes on both sides did not line up. Took 45 minutes with a dremel and using up two grinding bits to elongate the holes enough so I could attach the rack.